Introduction of Series JGX Wire Rope Isolators
Wire rope isolators are stable mounting assemblies of high quality stranded wire rope held with rugged metal retainers. Each isolating element has specific response characteristic determined by the diameter of the wire rope, the number of strands, the cable length, the cable twist or lay, and the number of cables per section.
Inherent damping is provided by flexure hysteresis, i.e., the rubbing and sliding friction between the strands of the wire rope.
Wire rope isolators provide higher levels of isolation than any other medium or design, with excellent vibration damping. Cable mounts are truly unique, adapted to a spectrum of physical and engineering requirements so broad that it includes almost every isolation need. They have put to rest the notion that a single mount cannot handle both shock and vibration.
Series JGX wire rope isolators, feature 3-dimension variable stiffness and variable damping, which provide excellent vibration and shock isolation in harsh environments in a practically unlimited range of applications – aircrafts, ships, tanks, oilfield logging truck.
Designed for restraining the interference of DC power cable, Series JGX wire rope isolators feature excellent common mode and differential mode filter performance, which have been widely using in many kinds of electronic equipments which have AC/DC, DC/AC, DC/DC switch converter or use DC as its power.
The static load bearing range is from 1kg to 1T, which meets many kinds of requirements and demands from our clients and gets stable customers’ royalty after their launch into domestic market.
Besides Series JGX for meeting the conventional demand of static load, welcome to visit our website www.kacise.com to see our other three series, GH, GX and GN, which are all designed for strong vibration and shock isolation.
Product Size Chart
| Product number | High(mm) | Width(mm) | Product weight(kg) | Installation method | Hole size(mm) | Thread size(mm) | Counterbore taper |
| JGX-127-8-X-3648-A-S | 71 | ± 2.54 | 84 | 0.83 | A, B, C, D, E, S | Ø9.0 +0.13-0.38 | M8X1.25 M7X1.0 | 90° |
| JGX-127-8-X-3047-A-S | 74 | 89 | 0.85 |
| JGX-127-8-X-2869-A-S | 76 | 105 | 0.90 |
| JGX-127-8-X-2313-A-S | 83 | 108 | 0.95 |
| JGX-127-8-X-1957-A-S | 89 | 114 | 0.98 |
| JGX-127-8-X-1735-A-S | 105 | 121 | 1.07 |
| JGX-127-8-X-1512-A-S | 108 | 140 | 1.2 |
Isolator Axes:
Wire rope isolators are multi-axis isolators. The diagram below includes load axis definitions and deflection considerations.
Damping: Typically 5-15%, depending on size and input level. For specific damping considerations, please consult Kacise.
Installation
We offer a full range of installations, including, the hole is installed, countersunk head screw to install, thread installation, the choices of upper and lower splints and mounting holes can be flexible configuration. We provide two order standard inch and metric, meet the domestic and foreign equipment, import and export of equipment requirements. Steel wire rope laps, customers can according to our product specification in accordance with the number of turns of wire rope product selection and booking. The least number of turns is 2 laps, the most commonly used is 12 laps, can also be customized according to customer's request.
The diagrams below illustrate typical mounting orientations.
Wire rope isolators are composed by the stainless steel cable and aluminum retaining bars or stainless retaining bars, which provide excellent effect of isolation. They are smaller than the traditional ones and adopt their advantages. With their mounting point, crimping patterns and size vibration, they could meet all requirements of industry, defense and others.
Three new types (GH, GX & GR) are designed to meet the requirements of vibrating isolation.
Application
Product Tags:
|
|
GXC12 Omni Directional Wire Rope Vibration Isolator Shock Absorbing Non Linear Stiffness Images
|
